All electrical transmission tests include swept frequency measurements
Pairs, quantity
4
Transmission Standards
ANSI/TIA-568.2-D | CENELEC EN 50288-3-1 | ISO/IEC 11801 Class D
Dimensions
Cable Length
304.8 m | 1000 ft
Diameter Over Jacket, nominal
4.902 mm | 0.193 in
Jacket Thickness
0.508 mm | 0.02 in
Conductor Gauge, singles
24 AWG
Electrical Specifications
Characteristic Impedance
100 ohm
dc Resistance Unbalance, maximum
5 %
dc Resistance, maximum
9.38 ohms/100 m | 2.859 ohms/100 ft
Dielectric Strength, minimum
1500 Vac | 2500 Vdc
Mutual Capacitance at Frequency
5.6 nF/100 m @ 1 kHz
Operating Frequency, maximum
100 MHz
Operating Voltage, maximum
80 V
Remote Powering
Fully complies with the recommendations set forth by IEEE 802.3bt (Type 4) for the safe delivery of power over LAN cable when installed according to ISO/IEC 14763-2, CENELEC EN 50174-1, CENELEC EN 50174-2 or TIA TSB-184-A
Safety Voltage Rating
300 V
Material Specifications
Conductor Material
Bare copper
Insulation Material
Polyolefin
Jacket Material
PVC
Mechanical Specification
Pulling Tension, maximum
11.34 kg | 25 lb
Environmental Specifications
Installation temperature
0 °C to +60 °C (+32 °F to +140 °F)
Operating Temperature
-20 °C to +60 °C (-4 °F to +140 °F)
Environmental Space
Non-plenum
Flame Test Method
CM
Packaging and Weights
Packaging Type
CommPak® box
Click on image to enlarge.
Click on image to enlarge.
Regulatory Compliance/Certifications
Agency
Classification
ISO 9001:2015
Designed, manufactured and/or distributed under this quality management system
ROHS
Compliant
CHINA-ROHS
Below maximum concentration value
REACH-SVHC
Compliant as per SVHC revision on www.commscope.com/ProductCompliance